Dimmer switch - Solid Brushed Brass 1-4 Gang

250W / 1 Gang / Brass

£59.00

Designed for Modern UK Homes

Timeless brass. Smooth dimming. Perfect lighting, every moment.

Bedroom

Kitchen

Bathroom

Heavy-duty, genuine metal faceplates and knurled knobs.

Every cut, polish and brush stroke exists to ensure each home detail reflects your pursuit of beauty in the everyday.

Fits standard UK 25mm back boxes with No Neutral digging required. Full smart power without deep wall holes.

√ Incandescent & Halogen
√ Dimmable LED/CFL/filament
√ Dimmable ceiling light/spotlight/downlight
√ Trailing edge & leading edge

High-speed chipset and tuned MOSFETs ensure silent, real-time stability. No flickering, no humming.

0~100% dimming range
No flickering
No buzzing

Exceeds UKCA standards. Built with V0 fire-rated recycled plastic and full protection against surges and overloads.

Over-Heat / Over-Temperature Protection
Over-Current Protection
Over-Load Protection
Short Circuit Protection
Anti-Surge Protection
V0 Fire-Rated Shell

Works with any home – no neutral wire required

Easy to install

Easy to install screwless design

No neutral required

Works with new & old house

Wide Load Compatibility

Works with LED, halogen, incandescent

More Highlights

Max. brightness

Automatic maximum brightness adjustment to prevent flickering.

Min. brightness

Programmable minimum brightness to prevent flickering.

Soft start

Gently start your lights to prevent them from being impacted.

Boost mode：

Boost the lights that don't illuminate when turned on at a lower level.

Eco-friendly:

The module is made from high-quality recyclable plastic.

Brightness memory:

Automatically restores your last used brightness level.

See It in Action

Quick Look

Deep Dive

Technical Specifications

Power 220 ~ 240V ac

Faceplate Solid brushed brass

Load type Halogen, Incandescent, Dimmable LED, Dimmable CFL Wattage: 5-250W

Grid compatibility MK, BG, DETA, Hager, Hamilton, Crabtree, Schneider, Schneider-lisse, Wandsworth

Wall box depth ≥25mm

Wiring No neutral required

Module Material PC (recycled plastic)

Dimming method Trailing edge & leading edge

2-way or multiway Yes (need to work with a 2-way intermediate switch)

Frequently Asked Questions

Can I choose between leading edge and trailing edge dimming?

Yes – both options are supported. Trailing edge (default) is recommended for most LEDs, while leading edge may be better for some halogens or older LED bulbs.

Can I adjust the brightness range for my bulbs?

Yes – you can set custom minimum and maximum brightness levels to avoid flicker and tailor dimming to your bulbs.

What type of bulbs are supported?

The dimmers are designed for high-quality dimmable LED bulbs or halogen lamps. Minimum load is 5W per lamp, with a total minimum of 5W per circuit.

Do I need a neutral wire?

No – Repenic are designed for UK homes and work without a neutral wire. This means they can be installed as a direct replacement for your existing wall switch in older properties as well as modern homes.

What should the depth of the installation box be?

It should be at least 25mm.

Can I install more than one 2-way dimmer in the same circuit?

In one circuit, there can only be one 2-way dimmer. If you want to control it from different locations, please connect it to 2-way or intermediate switches.

If you want to install multiple dimmers in the same circuit, please use our multi-way dimmers.

Do I need to regularly maintain my brass faceplate?

No need. Our brass plates have a protective coating on the surface that effectively prevents oxidation and fading, so almost no special daily care is required.

How many lights can I connect to a dimmer?

There is no limit on the number of lights controlled by the dimmer. As long as the total wattage of all lights controlled by this dimmer adds up to less than 250W. Due to certain errors in the nominal wattage of lights, we recommend that the total wattage of the lights be preferably below 230W.

Can it be installed in a bathroom?

Yes, but only if it meets the required safety standards and is placed in the right zone.

Click here to get more details.